Skip to main content

Rated: 4.9 / 5 based on 400+ reviews. Read our reviews

Emergency Service Available! Call 818-886-2600

What Are Air Ducts and How Do They Impact Your HVAC System?

Last Modified on January 16, 2025
What Are Air Ducts and How Do They Impact Your HVAC System?

What Are Air Ducts in Central Air?

Ducts are simply a vessel to deliver air into your home from the heating and/or air conditioning system. The ducts are a crucial component of all conventional heating and air conditioning systems. If the ducts are of an acceptable material, sized properly, designed and installed per accepted industry standards, they will deliver the correct amount of air quietly into your home. 

Yet, if the ducts are too small, too large, or designed or installed improperly, the system will not operate as it was designed, may be noisy and will cost more to operate. The grilles also have an effect, but that’s a different article.

Ductwork Regulations & Rules For Properties

Although the duct system is so important, there are currently no regulations that govern the sizing of the ducts.There are rules pertaining to the amount of insulation required around the ducts. There are rules that regulate what means must be used to connect the ducts. Even though the sizing of the ducting is critical to proper equipment performance, efficiency, and even longevity, there are no regulations that protect a homeowner from a contractor who installs ducts that are smaller than recommended.

History of Central Heating in Los Angeles

The first “central” heating units installed in the Los Angeles area were known as gravity heaters. Some of you may have lived in a home built in the 1920s to 1940s that had one or more gravity heaters located in the basement. These systems typically used round sheet metal ducts to distribute the heated air. These ducts (commonly known as hot air pipes) were sometimes insulated with asbestos.

These ducts worked well for this type of heater. They were unusually large, as gravity heaters had no blower motor to push air through the ducts. Although many attempts have been made, these ducts will not work when connected to a modern forced-air system.

In the 1950s, some new homes here were equipped with forced-air furnaces. The ducting was initially tin or galvanized sheet metal that may have been insulated with asbestos. Since tin ducts rust when subjected to cool, moist air, they are not recommended for use with air conditioning systems. These sheet metal ducts were generally small, relative to today’s duct sizes, because heating-only systems did not need to move as much air as an air conditioning system.

Since asbestos is a known carcinogen, these ducts cannot be altered in any way and must be removed by a licensed asbestos abatement contractor. In addition, techniques used at the time to connect these ducts allowed for substantial leakage, which is not acceptable with the new state duct sealing regulations.

Modern Duct Technology Today

Fast forward to today. New ducts are flexible and insulated with encapsulated fiberglass. They are sealed using new methods that reduce the leakage rate. The minimum insulation required on ducts today is 2 inches, but 3 inches is a better choice. The outer covering is now plastic, usually gray, or black. Some have a foil-type (Mylar) covering, which is more durable and resists damage from sunlight.


Frequently Asked Questions

What are ducts made of?

Ducts can be made from various materials, including galvanized steel, aluminum, and flexible plastic with encapsulated fiberglass insulation. Older ducts might have been made from tin or even asbestos-insulated materials, which require professional removal due to health hazards.

Why is duct size important?

The size of ducts affects the efficiency, noise levels, and overall performance of your HVAC system. Ducts that are too small can restrict airflow, while oversized ducts may lead to inefficiency and increased energy costs.

Can old ducts be reused with modern HVAC systems?

In many cases, older duct systems, such as those made for gravity heaters or early forced-air systems, are not compatible with modern HVAC systems due to differences in airflow requirements, insulation standards, and leakage rates.

What should I do if I suspect my ducts contain asbestos?

If your home has older ducts insulated with asbestos, it’s critical not to disturb them. Hire a licensed asbestos abatement contractor to remove or replace the ducts safely.

Schedule Service

"*" indicates required fields

By clicking “Send Message”, I am providing express written consent to receive autodialed and pre-recorded calls, texts, and SMS/MMS with marketing communications from Kahn Air Conditioning regarding home services at the phone number provided above, even if the number is on a corporate, state, or national Do Not Call list. Consent is not a condition to purchase services or products.

This field is for validation purposes and should be left unchanged.